Home  |   My Account  |   Dealer Locator  |   About Us  |   Contact Us  |  
Home > PARTS & ACCESSORIES > Parts-By-Part-Number
1/8 InfernoGT2 Chassis Kit w/S
Part Number 31830S24B
1/8 InfernoGT2 Chassis Kit w/S
Email a friend   
Price
Retail Price:  $1,300.00
Your Savings:  $260.00
Your Price:  
$1,040.00
Availability:
Not for Sale
 Description

Discontinued (May 2014)

Long wheelbase chassis powered by the SIRIO S24T engine!

2-speed A/T with dual disk brakes with reinforced parts for ultimate speed.

With an unrivaled seven 1/8 buggy World Championship victories, the racing DNA of the INFERNO produces the strongest 1/8 touring cars available. With the SIRIO S24T engine, special manifold and tuned muffler mounted on the popular GT2, the aluminum 3-piece clutch shoe delivers sharp acceleration and uses the full power band available. The intimidating 1/8 scale size of the GT2 is now locked and loaded like a high-powered missile.

The GT2 unites with the world-beating power of SIRIO and its S24T engine, optimized for the Inferno GT2.   Includes 3-piece aluminum clutch shoe to match the additional power of the SIRIO engine.   High strength wheels combine with the reliable grip of KC Slick Tires (55-degree hardness) for sure-footed performance.
Heavy-duty air cleaner included as standard. Delivers stable power even under the most severe racing conditions.   Dual disk brakes show excellent fade-resistant characteristics and promise stable braking power.   Equipped with 2-speed A/T matched to the power of the SIRIO engine. Produces both sharp acceleration and full extension of the power band.
 
150cc fuel tank delivers long run
time of about 10 minutes. Ideal
for endurance racing.
 

 

 

 

 
  • World Champion racing DNA is at the core with the low center of gravity shaft driven 4WD chassis.
  • 35mm longer wheelbase in the GT-2 produces improved stability and straight-line running.
  • Toque rods equipped on front and rear contribute to the machine’s superior running performance.
  • Small diameter flywheel delivers sharp acceleration response.
  • Highly efficient spiral-type gears use ring and pinion gears in front and rear differentials.
  • Turnbuckle upper arms and tie rods allow precision setting adjustments.
  • Full ball bearing specifications include a total of 18 ball bearings used throughout the drive train with two on the clutch bell.
  • Compatible with a wide variety of optional parts.
< Changes from GT to the GT-2 >
●35mm longer wheelbase in the GT-2 produces improved
 stability and more accurate scale dimensions.
●High fade-resistant characteristics are realized
 through the dual disk brakes.
●Turnbuckle upper arms and tie rods allow precision
 setting adjustments.
●Main chassis, wheel hubs and shock caps have a red
 anodized finish.
●Changes to the 2-speed gear ratio deliver higher top
 speeds.
●Increased fuel capacity with the 150cc fuel tank delivers
 longer run time.
●Small 34mm diameter flywheel (GT used 44mm) delivers
 sharper response.
●In addition to the rear, a front torque rod is now included.
●Front and rear differentials use spiral type ring and pinion
 gears.
●Full bearing specifications include a total of 18 ball
 bearings used throughout the drive train with two
 on the clutch bell.
●Aluminum 3-piece clutch shoe
●Hex bolts are used in most sections
 

 

A KIT is a higher level vehicle that includes nearly everything you will need to build a rolling chassis. You will need to supply items like body, tires, wheels and radio equipment. Required items may vary from kit to kit so please see Required Items For Completion section for full list.

< Required for Operation >

  • R/C System / 2-channel, 2-servo R/C system for cars
  • Body
  • Fuel and engine starting tools
  • Batteries specified for R/C system
  • Assembly
Chassis Technical Data
Length
515mm
Width
310mm
Height
135mm
Wheelbase
360mm
Tread (F/R)
262/265mm
Tire(F/R)
Φ 97×48mm
Gear Ratio
8.37,10.37:1
Weight
3,650g (approx.)