20571W-B G-ZERO Dynamic White Readyset
Kyosho’s Drone Racer is fantastic.
A group of 3 former mischievous boys are now around forty years old and
senior. They have grown into the men they once looked up to as children,
full of work and home responsibilities. They work late; get caught up
in the hustle of city life, and maintain otherwise normal healthy
lifestyles. Fast forward to the dawn of the Saturday on which they will
get together again for the first time in ages. Preparing their Drone
Racers and loading the car with other equipment (course), and then GO!
Unlike existing drones that are
difficult to control, the sensational DRONE RACER is controlled like an
R/C car with a pistol-grip transmitter. Takeoff and auto-hover with
one-touch control using ultrasonic sensors that remove the frustration
of learning complicated flying techniques. Now you can experience the
fun of drone flying at your own pace.
|3.7V-1000mAh Li-Po battery|
Flight time /10 minutes approx.
|Includes USB auto-cut charger.|
Charging time / 1-2 hours
(depending on USB power supply output)
|Includes USB cable to connect the |
drone to a personal computer.
The DRONE RACER is equipped with advanced ultrasonic sensors,
6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors),
barometric pressure sensor and four fast response mini coreless motors.
Speed switching function provides a choice between “Easy Mode” and “Active Mode” and
delivers direct intuitive flight control.
Altitude is automatically maintained with ultrasonic and
barometric pressure sensors. Altitude setting of 35cm or 60cm can be
selected with a switch on the R/C system and one-touch control is used
for takeoff, hovering and landing. Some people may feel frustrated in
learning drone flying techniques.Kyosho’s newly developed technology*(patent pending) removes these barriers so anyone can enjoy the fun of flying drones.
*according to Kyosho research
H-type chassis with split upper and lower sections and
left-right propellers connected on one propeller arm allow the propeller
unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/
max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a
Includes Arm holder 0°,10°,20°.
Optimal roll and yaw mixing match control from the steering wheel.
Uses similar control movement as a car.
The DRONE RACER is not designed for high altitude
performance, but for people to enjoy flying safely within their field of
vision near the ground. A total safety system includes: removable
propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates in case
you lose control of the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if
the drone becomes inverted, and “RADIO CUT EMERGENCY AUTO STOP SYSTEM”
in case the radio signal is lost. Weighing only 130g, the DRONE RACER is
not subject to the Japanese aviation law so you can fly freely anywhere
you like (except in restricted areas).
*as at aviation laws 10th December 2015
Model lineup features two body style designs, the G-ZERO and ZEPHYR,
which are based on a futuristic impression of car with the narrow form and
rear wings associated with formula racing cars.
Full color LED
installed on front propeller units allows a selection from 6 colors.
You can choose your favorite luminescent color to use as an identifier
Features rear LED with color indicator of propeller status.
Red : flashing indicates low battery warning, when lit
indicates safety function is released & can operate as tail lamp
Yellow : transmitter not connected = RADIO EMERGENCY STOP
Green: flashing indicates detecting horizontal, when lit
indicates ready to takeoff and safety function is activated
Blue : gyro calibration in progress
For easy front-rear identification the front mask features 2 bright white LEDs and the tail features red LED.
include: pairing button; LED color change; calibration
correction;setting mode changing button;5V external power port; extended
LED port, and micro USB terminal.
DRONE RACER can
connect to your (Windows) computer with the included USB cable to adjust
flight settings. In addition, an optional cable can also be used to
connect to an Android terminal with a USB host function to adjust
Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.
< Readyset Contents >
- 2.4GHz Transmitter KT-231P+
- USB auto cut charger
- Pinion gear replacement tool (combination binding stick)
- 3.7V-1000mAh Li-Po battery
- Arm holder (10°, 20°)
- USB cable
- Spare propeller (for one drone)
- Quick start guide
- Instruction manual
< Required for Operation (Sold Separately) >
- 4 x AA size batteries for transmitter
- Computer with USB port (for charging) or USB
power charger (if output is more than 2A, full charge can be complete
within one hour)
|302mm (with guard)
|300mm (with guard)
|5 : 1
|D5 x P4
|10 min approx.
|1-2 hours (depending on USB power output)
|30km/h approx. (normal specification)/34.5km/h
approx. (with 20° propeller angle setting)/38km/h approx. (when using
|318Wh/L (not subjected PSE)
|Low 35cm/High 60cm approx. (setting can be changed using software application) |