My Account  |   Dealer Locator  |   About Us  |   Contact Us  |   Mini Z USA Cup   |  
Home > PARTS & ACCESSORIES > Parts-By-Part-Number
FW-05R 4WD PureTen GP
Part Number 31581B
FW-05R 4WD PureTen GP
FW-05R 4WD PureTen GP
Email a friend   
Price
Your Price:  
$487.00
Availability:
Sorry, at this time we are out of stock on this particular item.
 Description

Sharing many parts with the World Championship winning V-ONE RRR, a wide scope for setting adjustment is also realized. This machine represents the endless search for racing winning performance. Shaft driven 4WD drivers around the world will not fail to show improved results with this machine.

Features

  • Uses the same front knuckles as the V-ONE RRR. Kingpin angle has been changed to 0 degrees from 2 degrees. Results in improved steering response and optimal Ackerman.
  • Modified shape of front upper suspension mounts achieves increased lateral and front/rear rigidity, and a low C of G.
  • Modified shape of upper deck realizes stronger support for suspension system.
  • Uses same rear hubs as the World Champion V-ONE RRR. Precision setting adjustments are made possible. Higher roll center realizes smaller roll axis and smoother return.
  • Rear suspension arm on the chassis side has been changed to harder single-side supported shaft. Realizes reliable axis rotation and smoother suspension stroke.
  • Optimal combination of the
  • Promises the high average cornering speeds of performance shaft driven 4WD.
  • Newly designed center body mount catches the most down-force from the body.
  • Low height engine mount and small diameter flywheel etc. deliver a low center of gravity.
  • Equipped with 2-speed A/T with shoe and 0.8 module gears.

 

What is a KIT?

  • A KIT is a higher level vehicle that included nearly everything you will need to build a rolling chassis. You will need to supply items like engine, pipe, body, tires, wheels and radio equipment. Required items may vary from kit to kit so please see Required Items For Completion section for full list.

Required For Operation

  • 2 Channel Receiver + 2 Standard Servos + Transmitter
  • Non pullstart Motor .12 size (SG Style Crank Shaft)
  • Header and Pipe set
  • 200mm Body
  • Starter Box
  • Fuel
  • Batteries

 

Technical Data

  • Length: 14.4in
  • Width: 7.8in
  • Height: 4.1in
  • Wheelbase: 258mm
  • Gear Ratio: 7.13/ 5.42:1
  • Weight: 1,800g approx
  • Engine: .12 Size/Class non pullstart motor